Clean Greasy Kitchen Exhaust Fan Easily Using Coconut Oil Hack Without Hard Scrubbing A smart kitchen cleaning hack shared online shows how applying coconut oil can easily loosen stubborn grease on a dirty exhaust fan without harsh scrubbing. While cleaning the kitchen, people usually focus heavily on the gas stove, marble slab, and washing sink, but one appliance is frequently overlooked, which is the exhaust fan. Smoke, steam, and microscopic oil particles released while cooking food gradually accumulate on the fan blades and shutters over time. Initially, this dirt appears minor and is easily ignored, but within a short period, the accumulated grease turns into a thick, sticky layer. Afterward, cleaning it with an ordinary cloth begins to feel extremely difficult. An easy method to tackle this everyday household nuisance was shared by digital creator Shashank Alshi in an Instagram video. According to the method he explained, the stubborn built-in grease is first loosened up, and then the removable parts of the fan are cleaned. If the exhaust fan in your kitchen has also been waiting for a thorough cleaning for a long time, this trick can prove useful. Important Safety Steps Before Cleaning the Exhaust Fan The most crucial aspect before starting the cleaning process of an exhaust fan is to ensure that its electricity supply is completely switched off. Ignoring safety during cleaning can prove hazardous. Afterward, if the fan shutter or any other component comes off easily, detach it carefully. How to Loosen Stubborn Grease Using Coconut Oil In the method detailed by Shashank Alshi, coconut oil is used on a heavily greased fan. For this process, a little coconut oil is applied to a cotton or soft cloth and rubbed over the greasy surface of the fan. Following this, the appliance is left as it is for about 30 minutes. This method might sound a bit unusual because using oil to remove dirt seems counterintuitive, but the video explains that oil softens the hardened grease, making it much easier to wipe off with a cloth later. Soaking the Detached Parts in Warm Water While the grease on the main fan body is loosening up, the removed parts can be cleaned simultaneously. Take warm water in a tub or a large vessel and mix a small amount of detergent powder along with cleaning powder into it. Now, submerge the separated parts of the fan in this water for about five minutes. Afterward, use a brush to gently clean away the accumulated dirt and grease. There is no need to apply excessive force or harsh pressure. The process can be repeated if necessary. Drying and Reassembling the Fan Parts After about 30 minutes, wipe away the oil and loosened grime from the fan surface using a clean, dry cloth or tissue paper. If dirt remains in some areas, clean them again with a light hand. After cleaning, it is essential to dry all the detached parts thoroughly. Reattach them to the fan only when they are completely dry. Key Precautions to Keep in Mind While Cleaning The biggest precaution while cleaning an exhaust fan relates to electricity and power safety. Do not pour water directly or use a dripping wet cloth on the motor assembly. The parts that were soaked in water must be dried completely before installation. Furthermore, if any part of the fan does not detach easily, it is better to check the cleaning instructions for that specific model instead of pulling it forcefully. What this means for you Failing to clean kitchen appliances in a timely manner reduces their operational efficiency and increases electricity consumption. • Across India: Neglecting regular cleaning of exhaust fans installed in homes can cause them to break down prematurely, leading to extra replacement expenses. • Kitchen Safety: Removing accumulated grease on time reduces fire hazards in the kitchen and maintains proper air ventilation. Why this happened The accumulation of dirt and oil on an exhaust fan is primarily caused by everyday cooking activities inside the kitchen and the smoke generated from them. • Steam and Particles: Steam and microscopic oil particles rising while cooking float in the air and stick to the suction fan upon contact. • Thick Layers: Over time, dust and soot settle on these oil particles, causing the grease to dry up and transform into a hard, thick layer. Questions & Answers 1. Why is coconut oil used for cleaning an exhaust fan? Coconut oil helps soften the stubborn and old grease accumulated on the fan so that it can be easily wiped off with a cloth later. 2. How long should the coconut oil be left on the fan after application? After applying coconut oil to the fan surface, it should be left as it is for about 30 minutes. 3. In what kind of water should the detached parts of the fan be soaked? The separated parts of the fan should be soaked in warm water mixed with a small amount of detergent powder and cleaning powder. 4. What major precaution is essential before starting the cleaning process? It is most crucial to ensure that the electricity supply to the exhaust fan is completely turned off before starting. 5. For how long should the parts be soaked in warm water? The detached parts of the fan should be soaked in the warm water solution for about five minutes. https://trendkia.com/en/trends/kichana-ka-chipachipa-exhaust-fan-sapha-karana-hua-asana-coconut-oil-se-minaton-men-hategi-mahinon-purani-gndagi-50084 TrendKia — Har trend, sabse pehle.