Carrying a valid pollution under control or PUC certificate while driving is legally mandatory for every vehicle owner. According to the motor vehicle rules, driving a vehicle without a valid PUC certificate can invite heavy fines, suspension of the driving license, or even strict actions like vehicle seizure. Sometimes, due to a lack of regular servicing, an aging engine, or fuel adulteration, vehicles fail the PUC test.
There is no need to panic in such situations, as this is an indication to improve the health of your vehicle. Failing the PUC test directly means that your vehicle is emitting harmful gases like carbon monoxide and hydrocarbons beyond the prescribed standards. Let us know the essential steps you should take after failing a PUC test so that your vehicle can easily pass the test again.
1. Understand the Test Report Carefully
Closely examine the failure report received from the PUC center. This report clearly states which gas level, such as carbon monoxide or hydrocarbons, is exceeding the permitted limit. Share this information with your mechanic so that they can reach the exact root of the problem.
2. Change Engine Oil and Filter
If the vehicle has not been serviced for a long time, visit a good service center first. Get the engine oil and oil filter replaced. Old or thick engine oil does not burn properly, which rapidly increases the level of smoke and pollution.
3. Check Air Filter and Spark Plug
A dirty air filter prevents sufficient air from reaching the engine, causing fuel to burn incompletely and emit black smoke. Clean or replace the air filter. Also, check the spark plugs in petrol vehicles, as faulty spark plugs expel unburnt fuel.
4. Clean Fuel Injector and Exhaust System
Carbon deposits in diesel or petrol injectors prevent proper fuel spray. Get the fuel injector and throttle body cleaned by a mechanic. In addition, make sure to check for any leakage or blockage in the catalytic converter and silencer.
5. Fill Quality Fuel and Retest
Adulterated fuel can also cause a vehicle to fail the PUC test. Fill good quality fuel from a reliable petrol station. After making all necessary rectifications, drive the vehicle for a few kilometers so that the engine warms up and then go for the PUC test again.



















