Power outages are effortlessly managed with the help of an inverter, making it a staple appliance in nearly every household today. However, many people install an inverter and completely neglect its maintenance for years in a corner of the house. The consequences become painfully obvious when a sudden power cut happens and the inverter shuts down within just ten minutes, reminding owners of their long-standing neglect.
A major reason behind a dropping inverter backup is the depletion of water levels inside the battery. Numerous users remain unaware of when to check the water level, how much water to pour, and what type of liquid is appropriate to use. A minor bit of carelessness can ruin an expensive battery worth fifteen to twenty thousand rupees much before its actual lifespan ends. Therefore, certain vital guidelines must be followed to extend the life of an inverter battery and secure optimal backup performance.
When should you add water to the battery?
The water level indicator attached to an inverter battery must be inspected every forty-five to sixty days, which translates to roughly once every month and a half to two months. If your residential area experiences prolonged power cuts or if it is the peak summer season, the battery undergoes frequent charging and discharging cycles. This activity causes the battery water to evaporate at a much faster rate. Under such circumstances, checking the water level indicator at least once a month becomes essential.
A transparent float indicator sits atop every single cell on the battery, marked with red and green indicators. When the upper part of the indicator reaches near or drops below the red mark, it signals that the time has come to refill the battery with water. While pouring water, utmost care must be taken to ensure the level reaches strictly up to the green mark. Overfilling the battery can cause acid to spill out during the charging phase, resulting in damage to both the battery unit and the flooring beneath it.
Always use distilled water only
Many individuals resort to pouring ordinary tap water or RO purified water into the battery when the fluid level drops. This represents a severe mistake that can wreck the internal components of the device. Tap water and RO water contain various dissolved minerals, chlorine, and iron particles. These elements gradually deposit over the lead plates situated inside the battery and disrupt the internal chemical reactions.
Due to this malfunction, the battery fails to charge properly and its backup duration diminishes rapidly. For this exact reason, an inverter battery should only ever be replenished with distilled water. This specific water is easily obtainable at any commercial battery retail shop. Being entirely free of minerals and impurities, it helps protect the internal plates, enabling the battery to deliver reliable backup for an extended period.
Precautions to take while refilling water
Filling water into a battery might sound like a straightforward task, but observing crucial safety steps during the process is extremely important. First of all, turn off the main switch of the inverter and unplug it completely from the wall socket before pouring any water. Attempting to add water while the battery is actively charging poses a serious risk of electrical shock.
Before opening the indicator caps, wipe the top surface of the battery thoroughly with a dry cloth to prevent dust and grime from entering the internal cells. Instead of pouring water directly, utilize a plastic funnel for precision. Additionally, if carbon deposits have accumulated on the battery terminals, they can be cleaned away using warm water and an old toothbrush. Paying attention to these minor details allows you to properly maintain your inverter battery and protect it from premature failure.



















